Recommended use: As a finishing coat for repaired vehicles. It can be used for metal and wooden furniture, including cabinets and metal security doors. 
Substrates: After suitable priming, it can be applied to mild steel, galvanized iron, aluminum, fiber glass and timber.
Limitation of use: For professional use only. This product is for the professional painting of vehicle only after reference to the manufacturer’s data sheet.
Caution: Flammable. Do not breathe vapor. Avoid contact with skin and eyes. During spraying wear suitable respiratory equipment. Keep the container away from naked flame. Seal container after use. Store in cool and dry conditions.
In case of spillage: Remove sources of ignition. Soak with inert material (e.g. sand, silica gel, acid binder, saw dust) and place in clean, empty container. Dispose in accordance with the local regulations. Do not empty into drains or waterways.

Priming: On a suitably primed surface or flattened old finish, apply Primer Surfacer grey, thinned with Race Standard Thinner. 
Thinner. Ratio 1:1 by volume.
Putty: Use Spot Putty over Primer Surfacer for filling shallow indentations. Flatten and spot primer before applying top coats.
Top coat: Use Fast Dry Enamel particularly recommended for commercial vehicles. Stir well before use.
Thin 4:1 by volume with AUTO4U Fast Dry Thinner. Apply one coat, allow 15-25 minutes to dry, then apply second coat.
Allow the paint to dry overnight: under heated condition the drying can be enhanced when the substrate is subjected to temperatures of 60c for 30 minutes.
 

• Durable
• High UV protection
• Excellent resistance to oils/petrol
• Mild chemicals
• Color retention even under harsh weather conditions.

Recommended use: For the recoating and repairing of passenger and commercial vehicles, to provide a superior appearance with high durability.
Substrates: It can be applied on suitably primed surfaces. These include previously painted mild steel, galvanized iron, aluminum, fiber glass and timber. 
Caution: Flammable. Irritating to respiratory system and skin. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Do not breathe vapor. Avoid contact with skin and eyes. During spraying wear suitable respiratory equipment. Keep the container away from naked flame. Seal container after use. Store in cool and dry conditions.
In case of spillage: Remove sources of ignition. Soak with inert material (e.g. sand, silica gel, acid binder, saw dust) and place in clean, empty container. Dispose in accordance with the local regulations. Do not empty into drains or waterways.
Limitation of use: For professional use only. This product is for the professional painting of vehicle only after reference to the manufacturer’s data sheet.

Priming: Applying two coats of AUTO4U Acrylic Primer yellow or beige.
Mixing ratio: 4 parts primer: 1 part 2k hardener: 10%-15% 2k thinner
Top coat: apply two coats of auto4u acrylic topcoat. Mixing ratio - 4 parts topcoat: 1 part 2k hardener: 10% - 15% 2k thinner.

• Rapid drying
• Excellent adhesion 
• Good filling
• Good sanding properties.  

Recommended use: To provide a key for Nitro Cellulose / Fast Dry and 2k Acrylic finishing coat application. Can be applied on steel, wood or fiber glass.

Caution: Flammable. Do not breathe vapor. Avoid contact with skin and eyes. During spraying wear suitable respiratory equipment. Keep the container away from naked flame. Seal container after use. Store in cool and dry conditions.

In case of spillage: Remove sources of ignition. Soak with inert material (e.g. sand, silica gel, acid binder, saw dust) and place in clean, empty container. Dispose in accordance with the local regulations. Do not empty into drains or waterways.

Limitation of use: for professional use only. This product is for the professional painting of vehicle only after reference to the manufacturer’s data sheet.

Priming: On a suitably primed surface or flattened old finish, apply Primer Surfacer grey, thinned with Standard Thinner. Ratio 1:1 by volume.
Putty: Use Spot Putty over Primer Surfacer for filling shallow indentations. Flatten and spot primer before applying top coats.
Top coat: Use Fast Dry Enamel particularly recommended for commercial vehicles. Stir well before use.
Thin 4:1 by volume with Fast Dry Thinner. Apply one coat, allow 15-25 minutes to dry, then apply second coat.
Allow the paint to dry overnight: under heated condition the drying can be enhanced when the substrate is subjected to temperatures of 60c for 30 minutes.
 

• Good flow 
• Fast drying

Recommended use: For commercial and private vehicles requiring a rapid, robust durable finish.
Substrates: Can be applied on suitably primed metal surfaces.
Limitation of use: For professional use only. This product is for the professional painting of vehicle only after reference to the manufacturer’s data sheet.
Caution: Flammable. Do not breathe vapor. Avoid contact with skin and eyes. During spraying wear suitable respiratory equipment. Keep the container away from naked flame. Seal container after use. Store in cool and dry conditions.
In case of spillage: Remove sources of ignition. Soak with inert material (e.g. sand, silica gel, acid binder, saw dust) and place in clean, empty container. Dispose in accordance with the local regulations. Do not empty into drains or waterways.
 

Priming: On a suitably primed surface or flattened old finish, apply Primer Surfacer grey, thinned with Standard Thinner. Ratio 1:1 by volume.
Putty: use Spot Putty over Primer Surfacer for filling shallow indentations. Flatten and spot primer before applying top coats.
Top coat: use Spot Putty Fast Dry Enamel particularly recommended for commercial vehicles. Stir well before use.
Thin 4:1 by volume with auto4u fast dry thinner. Apply one coat, allow 15-25 minutes to dry, then apply second coat.
Allow the paint to dry overnight: under heated condition the drying can be enhanced when the substrate is subjected to temperatures of 60c for 30 minutes.

• Rapid drying
• Hard
• Flexible 
• Superior sanding properties

Recommended use: On beaten vehicle panels to even out hammer marks, fill blow holes and polyester knife marks. Should also be used to fill indentations after primer application.
Limitation of use: For professional use only. This product is for the professional painting of vehicle only after reference to the manufacturer’s data sheet.
Caution: Flammable. Do not breathe vapor. Avoid contact with skin and eyes. During spraying wear suitable respiratory equipment. Keep the container away from naked flame. Seal container after use. Store in cool and dry conditions.
In case of spillage: Remove sources of ignition. Soak with inert material (e.g. sand, silica gel, acid binder, saw dust) and place in clean, empty container. Dispose in accordance with the local regulations. Do not empty into drains or waterways.
 

Apply by palette knife or plastic putty knife. 
Apply thin layers to prevent solvent trap.
Final layer should be proud of the surface to allow rubbing back.
 

Manufactured from a high quality alkyd resin and light-fast oil-stainers.
Economical
Easy to apply and hardwearing gloss finish.
Finish: Gloss.
Application: By brush or spray.
Thinning: Supplied ready for use but may be thinned with a little Regal White Spirit for 1st coat work, on bare timber, or for spray application. Stir well before use.
Drying Times: Surface dry: 4 hours.
Re-coatable: 14 hours.
Spreading Capacity: 13-15 m2/l when applied on smooth non-porous surfaces.
Equipment Cleaner: Regal White Spirit.
Colour Range: Available in Natural Oak, Light Oak, Medium Oak, Dark Oak, Walnut, and Mahogany.
Pack Sizes: 1⁄2 litre, 1 litre, 4 litres and 20 litres
Availability: From Regal Depots and through Regal Stockists.

• New and bare woodwork and furniture: Prepare surface (refer surface preparation data sheet SP 2). Apply 3 coats Regal Varnish Stain.
• Previously varnished woodwork – sound condition: Prepare surface. Apply 2 coats Regal Varnish Stain.
• Previously varnished surfaces – unsound: Thoroughly remove all varnish coatings down to bare timber if necessary using Regal Paint and Varnish Remover and/or mechanical sanding equipment. Prepare surface. Apply 3 coats Regal Varnish Stain.
Notes
1. Do not apply Regal Varnish Stain over surfaces that have been wax polished unless all traces of polish have been removed and the surface sanded thoroughly.
2. The shade effect obtainable with Regal Varnish Stain will vary greatly depending upon the type and colour of the timber being coated.
3. It will not be possible to produce a light effect (i.e. Natural Oak or Light Oak) on a naturally dark timber or timber, which has previously been stained with dark shade.
4. For best results, rub down with waterproof abrasive paper (wet and dry) or fine sandpaper between coats to remove any film surface defects and wipe clean.

Manufactured from the highest quality pigments and alkyd resin.
Unique formulation offering excellent opacity and durability, inhibiting early chalking. Excellent flexibility to withstand tropical weather conditions. 
Easy to apply. 
Wide colour range.
Finish: Full gloss.
Application: Brush, roller or spray.
Recommendation: Interior and exterior use.
Thinning: Supplied ready for use for brushing and rolling but for spray application, thin to the required viscosity with Regal White Spirit. Avoid overthinning. Stir well before use.
Drying Times: Surface dry: 4 hours. Through dry & recoatable after 16 hours.
Spreading Capacity: 13–15 m2 /l when applied over Regal Undercoat on a smooth surface.
Equipment Cleaner: Regal White Spirit.
Colour Range: Available in the full BS 4800 colour range plus additional Regal house colours, Ambience and other colour charts available on the Regal Tinting system.
Pack Sizes: 1⁄2 litre, 1 litre, 4 litres and 20 litres.
Availability: From Regal Depots and through Regal Stockists.

New Work for maximum protection, interior and exterior: Prepare surface (refer appropriate surface preparation Data Sheet). Apply 1 coat appropriate Primer. Apply1
coat Regal Undercoat. Apply 2 coats Regal Super Gloss.

Notes
1. When applying gloss on gloss the 1st coat should be lightly abraded with fine sandpaper to guarantee good inter-coat adhesion.
• Minimum Specification Work for Medium and Low Cost Projects: Prepare surface (refer appropriate surface preparation Data Sheet). Apply 1 coat (appropriate) Primer. Apply 1 coat Regal Undercoat. Apply 1 coat Regal Super Gloss.
• Previously Painted Surfaces in Sound Condition: Prepare surface. Apply 1 coat Regal Undercoat (Where necessary only). Apply 1 coat Regal Super Gloss.
• Previously Painted Surfaces in unsound Condition: Remove all old loose, flaking and wrinkled oil paint using paint scrapers/sandpaper or by blow torch, paint
and varnish remover or mechanical means, down to the original surface where necessary. Patch prime (bare metal, wood plaster surfaces) with appropriate primer. Apply
1 coat Regal Undercoat. Apply 2 coats Regal Super
2. When using White or a pale shade of Undercoat and Gloss. finishing coats over a dark primer or a dark previously painted surface, the application of a second coat of undercoat may be required.
3. Stop up cracks, nail holes and other surface imperfections with linseed oil, Putty or appropriate filler, after priming or before undercoating.
4. Allow 16 hours drying time and lightly rub down and dust off between coats.
5. When repainting sound gloss painted surface with a similar shade, the application of one good coat of Regal Gloss is frequently sufficient.

Manufactured from finest pigments and extenders incorporated in a high quality alkyd resin medium and drying oils.
Excellent opacity and sanding properties, provides a sound key for subsequent finishing coat.
Finish: Matt.
Application: Apply by brush, roller or spray equipment.
Thinning & Mixing: Where necessary thin with Regal White Spirit to ease brushing and for spray application. Avoid over thinning. Stir well before use.
Drying Times: 12-16 hours.
Recoatable overnight under normal conditions.
Spreading Capacity: 13-17 m2/l when applied to smooth, non-porous surfaces.
Equipment Cleaner: Regal White Spirit.
Colour Range: White.
Pack Sizes: 1⁄2 litre, 1 litre, 4 litres, and 20 litres
Availability: From Regal Depots and through Regal Stockists Specifications

• New primed metal, wood, plaster etc. Prepare surface(see relevant surface preparation sheets for plaster,metal, wood). Apply 1 coat Regal Undercoat over the appropriate primer. For maximum protection and when overcoating a dark primer with a pale undercoat, a second coat of undercoat is recommended.
• Previously painted surfaces - unsound condition. Prepare surface and patch prime bare surfaces with appropriate primer. Apply 1 coat Regal Undercoat.
• Previously painted surfaces in reasonable condition - Prepare surface. Apply 1 coat Regal Undercoat.
• Previously painted surfaces in good condition - Rub down with fine sandpaper. If previous gloss or eggshell finish is in good condition the application of an undercoat can be avoided unless a colour change is required.
   

• Manufactured from the finest light-fast pigments ground in a flexible medium.
• Unique formulation provides a flexible coating to withstand extreme variations in weather conditions. Excellent hiding power. One finishing coat normally sufficient for redecoration work.

Finish: Semi-Gloss.
Application: By brush or spray on corrugated surfaces. Can also be applied by roller on flat surfaces.
Thinning: Supplied ready for use but where necessary and for spray application can be thinned with Regal White Spirit.
Avoid over-thinning; otherwise the opacity will be affected. Stir well before use.
Drying Times: Recoatable in 16 hours.

Spreading Capacity: 10-13 m2/l when applied to smooth, non-porous surfaces.
Equipment Cleaner: Regal White Spirit.
Colour Range: Green, Red Oxide and Cornflower. Also available on 18
selected colours on request.
Pack Sizes: 1 litre, 4 litres and 20 litres.
Availability: From Regal Depots and through Regal Stockists.

• Weathered Galvanized Surfaces/G.C.I Sheets: Prepare surface (refer surface preparation Data Sheet SP 3). Apply 2 coats Regal Roof Paint.
• New (unweathered) Galvanized Surfaces/G.C.I. Sheets: Degrease and prepare surface (refer Data Sheet SP 3). Apply 1 coat Regal Zinc Phosphate Primer or Regal Etch Primer (recommended). Apply 2 coats Regal Roof
• Previously Paint. Painted roof Sheets and Metal Work: Prepare surface. Patch Prime with appropriate primer on bare metal surfaces only. Apply 1 coat or 2 coats Regal Roof Paint.

• Manufactured from a special medium pigmented with Zinc Chromate.
• Excellent rust inhibiting and adhesion properties. 
• Hard drying. 
• Lead free pigmentation.

Finish: Matt.
Application: Apply by brush, roller or spray.
Thinning: Supplied ready for use but can be thinned where necessary, and for spray application, thin with Regal White Spirit. Avoid overthinning.
Drying times: Overcoatable in 16 hours.
Spreading Capacity: 12-16 m2/l when applied by brush on a smooth, non-porous surface.
Equipment Cleaner: Regal White Spirit.
Colour Range: Red Oxide and Yellow.
Pack Sizes: 1 litre and 4 litres.
Availability: From Regal Depots and through Regal Stockists.

• New Iron and Steel and Aluminium Alloys: Prepare surface (refer SP3). Apply 1 coat Regal Zinc Chromate Primer.
• Galvanized Iron: Zinc Chromate Primer is not recommended for application to new, un-weathered galvanized iron. However, galvanized surfaces which have been allowed to weather or which have been treated with an Etch Primer can be coated with Zinc Chromate Primer. Alternatively, Regal Zinc Phosphate Primer can be applied directly to new galvanized
• surfaces after thorough preparation, degreasing etc.
• Old galvanized surfaces, after thorough preparation, can be treated as for new steelwork.
• Previously painted surfaces: Prepare surface and patch prime bare metal areas with 1 coat Regal Zinc Chromate Primer.